ep

January 13, 2021

Any damage about the teeth surfaces of the sprocket diminishes the life of your conveyor chain.
With traditional sprockets, substantially worn sprocket teeth had been repaired by teeth padding or the total sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers to the dramatic cost savings in expense and time.
Structure
The teeth is often replaced by two techniques: personal tooth replacement or sectional teeth replacement.
The bolts and nuts used for mounting the teeth on towards the sprocket are spot-welded to stop loosening.
The respective structures are illustrated over the right.
The above photo plus the prime correct illustration display a sprocket for personal tooth replacement. Since the joint encounter among the replaced teeth as well as sprocket is formed in the one of a kind arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Additionally, because the load acting around the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket development is patented.
There are actually two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for substantial sprockets getting heavy loads and welded sheet steel hubs for other applications.