Due to their design and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized regarding efficiency
Do you expect a drive solution to impress you with its high level of performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP for you. These can be implemented separately in the modular program. In this way, they offer you an enormous range of sizes, gear ratios and motor sizes.
However, their greatest strength is usually their running smoothness and their incredibly low noise development. One thing is certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. Included in these are the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear models. This is how you save additional energy in the operation of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to fit your person requirements – with a wide selection of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm equipment unit and performance-optimized engine. Even greater variance can be achieved because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you are already saving money and time with this selection and task planning. It is because our modular system allows a multitude of combination options for gear devices and motors. You can consequently reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
Combine the helical-worm gear unit with this AC motors:
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional toughness and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
High permitted overhung loads
Helical-worm Gearmotor S Series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Due to their outstanding effectiveness, these drives can be used in every industrial sector and customized to individual torque and rate requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel materials with special lubricants, optimized form, this powerful motor achieves high levels of efficiency and torque. The housing machined on all sides enables diverse mounting options. Dual chamber shaft seals are used as standard.
The low contour design makes it suitable for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and better torque capacity in smaller sized sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water out.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to simply accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors set new standards for reliability, effectiveness and economic climate with unparalleled features which includes hollow helical worm gear motor shafts in the smallest sizes. An inverter friendly style provides for easy integration right now and a really future proof remedy. The EP gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in substitute positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
EP gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is dust tight and hose evidence,and can be utilized outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the result shaft of the unit.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique combination of optimized worm wheel material with special lubricants and optimized shape, this powerful geared engine achieves high degrees of effectiveness and torque. The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with extended life performance features and simplified maintenance. The usage of state of the art helical and worm equipment combinations affords optimum performance fulfilling a multitude of ratio requirements. The 800 BR is functionally interchangeable with the majority of major manufacturer’s drives.
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All devices shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Output flange kits
Torque arm kits
Output shaft kits
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All devices adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared motor. A favorably priced alternate for the standard jobs anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC engine are directly flange mounted, the pinion is upon the electric motor shaft. This integrated small design is an essential factor for the high accuracy and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter operation usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision ground. The worm wheels are made from special wear-resistant bronze. Helical worm gears include a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also part of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal design. The housings are made from high quality cast iron. The rugget wall space and inner ribbing ensure extremely torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Basic mounting, flange mounting or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Free input shaft
ATEX specification according to directive 94/9/EG