January 4, 2021

1.A connecting link of an O-ring Chain for standard application is pre-coated with grease in the pins. Before connection, confirm the grease around the surfaces of pins, and in the event the amount of grease is small, apply grease with bare hands. (If gloves are made use of, the grease is going to be absorbed by the gloves.)
Instance: Once the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted at the roots with the pins. Should the O-rings come loose as a result of vibration during transport, refit the O-rings in to the roots of your pins.
In this case, make sure to return the grease collected on the roots of the pins on the central surfaces with the pins, far more at portion A than at portions B proven during the above illustration. (Portions A is worn on account of sliding with all the bushings.)
two.The chain can be most conveniently linked to the teeth of a sprocket. Engage the backlinks at the two ends with the chain with all the sprocket teeth and fit connecting pins. In the event the sprocket could be moved, the chain can also be connected around the loosened side.
3. Connecting procedure
one.Confirm that O-rings are attached towards the roots in the pins.
2.When the volume of grease applied over the connecting pins is modest, coat the pins with grease in the central portions.
3.Insert the connecting pins to the bushings from the inner hyperlinks at each ends.
four.Confirm that the grease is applied to your whole encounter of your O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and while pressing the connecting plate, install the spring clip. Verify whether or not the head (the end without a split) on the spring clip is turned while in the feeding direction in the chain. (See the next illustration.)
six.You’ll want to verify that the spring clip is securely fitted while in the clip grooves of your connecting pins.
This completes jointing with the connecting website link. Note that grease within the surfaces of connecting pins and O-rings may be eliminated all through installation do the job. In this instance, re-grease using the grease over the surface on the base chain or even the grease from the polyethylene bag during which the connecting website link was contained.