Website: www.rigid-shaft-coupling.xyz
Address: Xihuan Industrial Zone, Botou City, Hebei Province
WGZ type with brake wheelDrum gear couplingIt is composed of internal gear ring with the same number of teeth and flange half coupling with external teeth.The external teeth are divided into straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The center of the spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. Allows a larger angular displacement (compared to the straight tooth coupling), which can improve the contact conditions of the teeth, increase the torque transmission capacity, and prolong the service life.The contact state along the tooth width when there is angular displacement.
model |
Nominal to |
Permissible speed [n] /r·min-1 |
Diameter of shaft hole d1, d2, d Z |
Shaft hole length L | Do | D | D2 | D1 | B | C | C1 | C2 | 质量 m / kg |
Inertia Quantity I /kg·m2 |
lubricating For fat Quantity/kg |
|||
Y | J1 | |||||||||||||||||
WGZ1 | 700 | 4000 | 12, 14 | 32 | --- |
160 200 250 |
122 | 98 | 60 | 58 | 30 | -- | --- | 5.62 | 0.0078 | 0.11 | ||
16, 18, 19 | 42 | --- | 20 | -- | --- | |||||||||||||
20, 22, 24 | 52 | --- | 10 | -- | --- | |||||||||||||
25, 28 | 62 | 44 | 3 | 19 | 18 | |||||||||||||
30-32-35 | 82 | 60 | 23 | 12 | ||||||||||||||
40, 42 | 112 | 84 | 29 | 12 | ||||||||||||||
WGZ2 | 1250 | 4000 | 22, 24 | 52 | — |
200 250 315 |
150 | 118 | 77 | 68 | 20 | — | — | 9.65 | 0.022 | 0.12 | ||
25, 28 | 62 | — | 10 | — | — | |||||||||||||
30-32-35 | 82 | 60 | 3 | 23 | 16 | |||||||||||||
40, 42, 45, 48, 50, 55, 56 | 112 | 84 | 29 | 16 | ||||||||||||||
WGZ3 | 2500 | 4000 | 22, 24 | 52 | — |
200 250 315 |
170 | 140 | 90 | 80 | 33 | — | 16.5 | 0.047 | 0.2 | |||
25, 28 | 62 | — | 23 | — | ||||||||||||||
30-32-35 | 82 | 60 | 3 | 23 | 25 | |||||||||||||
40, 42, 45, 48, 50, 55, 56 | 112 | 84 | 29 | 16 | ||||||||||||||
60, 63 | 142 | 107 | 36 | |||||||||||||||
WGZ4 | 4500 | 3000 | 30-32-35 | 82 | — |
250 315 400 |
200 | 160 | 112 | 90 | 13 | — | — | 25.3 | 0.098 | 0.28 | ||
40, 42, 45, 48, 50, 55, 56 | 112 | 84 | 3 | 29 | 17 | |||||||||||||
60, 63, 65, 70, 71, 75 | 142 | 107 | 36 | |||||||||||||||
80 | 172 | 132 | 41 | |||||||||||||||
WGZ5 | 7100 | 3000 | 30-32-35 | 82 | — |
315 400 |
225 | 180 | 128 | 100 | 23 | — | — | 34.7 | 0.174 | 0.45 | ||
40, 42, 45, 48, 50, 55, 56 | 112 | 84 | 3 | 29 | 19 | |||||||||||||
60, 63, 65, 70, 71, 75 | 142 | 107 | ||||||||||||||||
80, 85, 90 | 172 | 132 | 36 | |||||||||||||||
WGZ6 | 10000 | 3000 | 32, 35, 38 | 82 | — |
315 400 |
245 | 200 | 145 | 112 | 35 | — | — | 51.3 | 0.29 | 0.65 | ||
40、42、45、48、50、55、56、 | 112 | — | 5 | 38 | 20 | |||||||||||||
60, 63, 65, 70, 71, 75 | 142 | 107 | 43 | |||||||||||||||
80-85-90 | 172 | 132 | 48 | |||||||||||||||
100 | 212 | 167 | ||||||||||||||||
WGZ7 | 14000 | 2500 | 32, 35, 38 | 82 | — |
400 500 |
272 | 230 | 160 | 122 | 45 | — | — | 68 | 0.53 | |||
40, 42, 45, 48, 50, 55, 56 | 112 | — | 15 | |||||||||||||||
60, 63, 65, 70, 71, 75 | 142 | 107 | 5 | 38 | 20 | |||||||||||||
80-85-90 | 172 | 132 | 43 | |||||||||||||||
100, 110 | 202 | 167 | 48 | |||||||||||||||
WGZ8 | 20000 | 2500 | 55, 56 | 112 | — |
400 450 |
290 | 245 | 176 | 136 | 29 | — | — | 79 | 0.71 | 0.95 | ||
60, 63, 65, 70, 71, 75 | 142 | 107 | 5 | 38 | 34 | |||||||||||||
80-85-90 | 172 | 132 | 43 | 20 | ||||||||||||||
100-110-120 | 212 | 167 | 48 | 20 | ||||||||||||||
WGZ9 | 25000 | 2000 | 65-70-71 | 142 | 107 |
400 500 630 |
315 | 265 | 190 | 140 | 5 | 38 | 38 | 106.5 | 1.05 | 1.3 | ||
80-85-90 | 172 | 132 | 43 | 28 | ||||||||||||||
100-110-120 | 212 | 167 | 48 | |||||||||||||||
130, 140 | 252 | 202 | 53 | |||||||||||||||
WGZ10 | 40000 | 2000 | 75 | 142 | — |
400 500 630 |
355 | 300 | 225 | 165 | 28 | — | — | 159 | 1.74 | 1.6 | ||
80-85-90 | 172 | 132 | 5 | 48 | 38 | |||||||||||||
100-110-120 | 212 | 167 | 48 | |||||||||||||||
130, 140, 150 | 252 | 202 | 53 | |||||||||||||||
160 | 302 | 242 | 63 | |||||||||||||||
WGZ11 | 56000 | 1700 | 85, 90, 95 | 172 | — |
500 630 710 |
412 | 345 | 256 | 180 | 15 | — | — | 215 | 3.67 | 2 | ||
100-110-120 | 212 | 162 | 8 | 51 | 32 | |||||||||||||
130, 140, 150 | 252 | 202 | 56 | |||||||||||||||
160, 170, 180 | 302 | 242 | ||||||||||||||||
WGZ12 | 80000 | 1700 | 120, 125 | 212 | 162 |
500 630 710 |
440 | 375 | 288 | 207 | 8 | 51 | 45 | 303 | 6.4 | 3.4 | ||
130, 140, 150 | 252 | 202 | 56 | 32 | ||||||||||||||
160, 170, 180 | 302 | 242 | 66 | |||||||||||||||
190, 200, 220 | 352 | 282 | 76 | |||||||||||||||
WGZ13 | 112000 | 1700 | 140, 150 | 252 | 202 |
630 710 |
490 | 425 | 320 | 235 | 8 | 56 | 38 | 391 | 10.45 | 4.4 | ||
160, 170, 180 | 302 | 242 | 66 | 32 | ||||||||||||||
190, 200, 220 | 352 | 282 | 76 | |||||||||||||||
WGZ14 | 160000 | 1500 | 160, 170, 180 | 302 | 242 |
710 800 |
545 | 462 | 362 | 265 | 10 | 68 | 32 | 523 | 17.48 | 6.6 | ||
190, 200, 220 | 352 | 282 | 78 | |||||||||||||||
240, 250, 260 | 410 | 330 | — | 10 | ||||||||||||||
Note: 1. Mass and moment of inertia are approximate values calculated based on the large-diameter Y-axis hole, and the brake wheel is not calculated. 2. Cone-shaped shaft hole The large shaft diameter is up to 220mm. 3、不同制动轮直径的C、C1、C2植为表中数值再加K/2,k值见表4.11 |
|