Website: www.rigid-shaft-coupling.xyz
Address: Xihuan Industrial Zone, Botou City, Hebei Province
LMD (formerly MLZ) type single flange typePlum elastic couplingIt is mainly composed of two convex teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation, which plays a role of automatic compensation.
MLZ series plum blossom coupling features: plum blossom elastic coupling has simple structure, small radial dimension, light weight, small moment of inertia, suitable for medium and high speed occasions, plum blossom elastic coupling is stable and reliable, and has good reduction Vibration, buffering and electrical insulation properties.
The quincunx-shaped elastic coupling has greater axial, radial and angular compensation capabilities. The quincunx-shaped elastic coupling has high-strength polyurethane elastic elements that are wear-resistant and oil-resistant, have large bearing capacity, long service life, and reliability. No coupling is required. Lubrication, low maintenance workload, continuous long-term operation.
梅花弹性联轴器主要适用于起动频繁、正反转、中高速、中等扭矩和要求高可靠性的工作场合,例如:冶金、矿山、石油、化工、起重、运输、轻工、纺织、水泵、风机等。工作环境温度 -35℃~+80℃,传递公称扭矩25~12500Nm,许用转速1500~15300r/min。
Basic parameters and main dimensions of LMD(MLZ) series plum-shaped elastic coupling (GB/T5272)/mm
model | Nominal torque Tn/N·m | Allowable speed [n]/r·min-1 | Axle hole diameter d1, d2, dz | L | L0 | D | D1 | Elastic part model | Mass m/kg | Moment of inertia I/kg·m2 | |
Elastic part hardness | |||||||||||
a(HA) | b(HD) | ||||||||||
80±5 | 60±5 | ||||||||||
LMD1 | 25 | 45 | 8500 | 12, 14, 16, 18, 19, 20, 22, 24, 25 | 35 | 92 | 50 | 90 | MT1-aMT1-b | 1.206 | 0.00082 |
LMD2 | 50 | 100 | 7600 | 16, 18, 19, 20, 22, 24, 25, 28, 30 | 38 | 101.5 | 60 | 100 | MT2-aMT2-b | 1.648 | 0.0014 |
LMD3 | 100 | 200 | 6900 | 20, 22, 24, 25, 28, 30, 32 | 40 | 110 | 70 | 110 | MT3-aMT3-b | 2.357 | 0.0024 |
LMD4 | 140 | 280 | 6200 | 22, 24, 25, 28, 30, 32, 35, 38, 40 | 45 | 122 | 85 | 125 | MT4-aMT4-b | 3.556 | 0.005 |
LMD5 | 350 | 400 | 5000 | 25, 28, 30, 32, 35, 38, 40, 42, 45 | 50 | 138.5 | 105 | 150 | MT5-aMT5-b | 6.361 | 0.0135 |
LMD6 | 400 | 710 | 4100 | 30、32、35、38、40、42、45、48 | 55 | 155 | 125 | 185 | MT6-aMT6-b | 10.768 | 0.0329 |
LMD7 | 630 | 1120 | 3700 | 35*、38*、40*、42*、45、48、50、55 | 60 | 172 | 145 | 205 | MT7-aMT7-b | 15.302 | 0.0581 |
LMD8 | 1120 | 2240 | 3100 | 45*、48*、50、55、56、60、63、65 | 70 | 195 | 170 | 240 | MT8-aMT8-b | 22.717 | 0.1175 |
LMD9 | 1800 | 3550 | 2800 | 50*、55*、56*、60、63、65、70、71、75、80 | 80 | 224 | 200 | 270 | MT9-aMT9-b | 34.439 | 0.233 |
LMD10 | 2800 | 5600 | 2500 | 60*、63*、65*、70、71、75、80、85、90、95、100 | 90 | 248 | 230 | 305 | MT10-aMT10-b | 51.358 | 0.459 |
LMD11 | 4500 | 9000 | 2200 | 70*、71*、75*、80*、85*、90、95、100、110、120 | 100 | 284 | 260 | 350 | MT11-aMT11-b | 81.302 | 0.977 |
LMD12 | 6300 | 12500 | 1900 | 80*、85*、90*、95*、100、110、120、125、130 | 115 | 321 | 300 | 400 | MT12-aMT12-b | 115.53 | 1.751 |
LMD13 | 11200 | 20000 | 1600 | 90*、95*、100*、110*、120*、125*、130、140、150 | 125 | 348 | 360 | 460 | MT13-aMT13-b | 161.79 | 3.366 |
LMD14 | 12500 | 25000 | 1500 | 100*、110*、120*、125*、130*、140*、150、160 | 135 | 358 | 400 | 500 | MT14-aMT14-b | 196.30 | 4.867 |
Note:
1. Mass and moment of inertia are approximate values calculated based on the material being cast steel, L recommendation, and large shaft hole.
2. The diameter of the shaft hole with * can be used for the Z-shaped shaft hole.
3.a and b are the hardness codes of the two elastic parts.
|